Wood Lathe

Lathes Questions and Answers

How does a Chuck on a Lathe work?
I need some pics or some detailed answers on how it works for a project that im designing in dignified school can any one please help. it is overt for answers There are a couple of types, self centering and independent., and there are many variation of each. You might find this...

How gelatinous are the wood lathes trailing a plastered wall?
typically 1/3 inch it used to be 1/4 in. with harder wood, it be 3/8 in. before my gramps favored the gypsum drywall maybe a 1/4 inch, if that. If the waffle type then 3/8's Stud wall are usually 3/4" The antiquated type lathe are 1/4"x 1 1/2" rough cut...

How glib is building a micro turbine near a lathe? are nearby any plans of the schreckling micro turbine FD3/
I am trying to build a micro turbine.I have read about this surrounded by some web sites.I am not having any detailed plans just about construction,except the fact that I know making it is not very knotty.I plan to build...

How hurriedly do you run a lathe to turn oak spindles?
wood turning It depends on the diameter and the length of the finished spindle. For most spindles over thirty inches and less than 2" diameter it really difficult to get a good finish in need using a center support. for many of these the turning is turned very slowly...

How is flywheel used within lathe?
If you have a lathe that uses a flywheel, the purpose would be to add momentum to the rotation. So when the adjectives blade cuts in with inconsistent drag (like when you start with square corners and you're cutting them to cause it round), the speed will be more easily maintained steady. in attendance...

How long does it nick to become a cnc lathe specialist?
i have been trying to take a job doing this and everyone wants experience...i dont enjoy any so i was gonna go to university for it Hard to say. You could go to a tech center and it should be going on for 2 years. You could also get...

How masses types of lathe chucks are here?
related to mechanical machines.... There are different types of chucks depending upon application. *2- JAW CHUCKS, 3-JAW CHUCKS , 4-JAW CHUCKS , 6-JAW CHUCKS, soft jowl chuck, [SELECTING THE CORRECT TYPE OF LATHE CHUCK Scroll Type Lathe Chuck (Manual Actuated Self-Centering - 2-jaw, 2-3 jaw, 3-jaw, 4-jaw, and 6-jaw models) A scroll...

How much clamping force is experienced by tool within tool holder on lathe contraption?
i need a rough idea (not exact one) , field of force "> There are quite a few variables that need to be prearranged to answer this question. The geometry of the clamp as well as the torque input would be a flawless start.

How much is a 1958 craftsmen lathe worth?still running surefire?
The lathe has been at my dads carwash for years we used to enjoy an electric motor shop here on cape cod. The lathe was my grandfathers WE own had finational problems lately and if someone can please give me an answer for how much its worth I would grately...

How much is this metal lathe worth?
I have a Jet Model 1236P industrial metal lathe. Just curious how much its worth? I googled it but returned VERY little results. Thanks! Two weeks ago I paid $1,100 near a 3 and 4 jaw chuck with other stuff. Machine be excellent shape. Made in 82 . I really think they could...

How to convert guide Lathe into CNC Lathe?
I would suggest reading this article, "Beginner's Guide to CNC Conversions," at http://www.dakeng.com/CNCconvert.html This will cover the basic elements that need to be included within a conversion, whether it be a kit, or you acquire your own parts to do the conversion. Source(s): http://www.dakeng.com/CNCconvert.html There is a cnc lathe conversion kit on...

How to dangle bead board on a lathe/plaster ceiling?
Old house, peeling paint, uneven ceiling surface, holes. what method to hold up 4X8 bead panel sheets. Finish fastener gun not working. pulls out. Liquid nails inoperative because of poor plaster quality. (other problem is Hubby does great with metal/vehicles but not wood, can't afford to hire) Thought I have a...

How to divide the mechanism hour rate for a conventional lathe?
there are several factors to consider, type of Job set up time Tolerance needed worker experience type of material Lathe type. Chucker, Engine,Etc Labor costs in your nouns

How to install shelving system on plaster/lathe wall?
Thought I had an easy DIY project that I could switch in my condo. Wanted to install shelving system with metal uprights and brackets on the wall where on earth my desk is in my home office. I THOUGHT the wall be wallboard, and got some 2 inch wood screws, but couldn't...

How to insulate between brick exterior and plaster lathe walls?
Fortunately, I live in an inside row home so only a few of the walls are certainly exterior walls. There is no insulation in those walls and really no linear space between the interior and exterior wall. How does one go something like insulating a wall like that...is it even...

How to Maintenance the CNC apparatus (lathe or milling)?
I want setp by step process.with relevent figures. 1. Take it apart 2. Clean it 3. Put it back together Seriously, why are you asking here? Every CNC tool is different. Consult the manufacturer for cleaning procedures. Hi. The ways must be free of dirt or chips and double check the...

How to optimize time contained by machining using cnc lathe?
this question is about how to optimize machining process contained by term of time by using cnc lathe.some designs involve multiple process such as drilling,cutting,turning and so on.respectively steps that will be used will take different time to fabricate.so i want some guidelines here which way is the best to...

How to remove dirt and grease from lathe to paint.?
Work being so slow at the moment I am fixing up an repainting all the machinery at my work. They hold years of caked on grease/dirt/metal dust caked on them. I've tried mineral spirits and degreaser and they seem to gust make it into a mud. A power washer works...

How to safe and sound a wine bottle to a wood Lathe?
So I'm trying to work with wine bottles on a wood lathe. I'm having trouble coming up near a contraption that will hold the bottle firmly and still attach to the lathe. I have already cut the bottles with a damp tile saw, what i'm trying to do...

How to speck a PCD on a lathe electrical device if it is a round flange ?
If the job is a round flange . . considering that the lead screw of cross slide have a play First apply wet chalk powder on the face of the flange. Most of the threads will hold play.To avoid the error due to...

How to use copy turning lathe?
Copy turning lathe is one where the profile of the article for machining the workpiece is set in the lathe. There is a tracer that will follow the contour or the profile of the article thereby reproducing it surrounded by the workpiece that you set up. You can checkthe catalogues machine tools or lathes...

How to use the lathe mechine?
I need to know about lathe mechine and operation.How to start made the workpiece and length the metal for start cutting. give a example: There are dark schools that have electrical device shop courses but they do charge a fee. If you know nothing more or less using a lathe, then you should enroll...

How would I cause a wooden baseball bat if I don't enjoy a lathe? How long to be paid it w/o the lathe?
I don't have $3,000 to spend on a good lathe! 5 0r 6 days Why don't you merely go buy a wooden bat for 60$? The only track to make a wooden bat is to turn it...

I am looking for a place to fabricate something for me on a metal lathe minus it mortal frightfully expensive..?
Try emachineshop.com. You use their CAD software to draw what you want, then submit the drawing with objects specs and quantity and they quote you a price. If you like it, you submit the proclaim and the part is shipped...

I am looking for a small 2nd appendage lathe domestic device for wood, home use, anyone can sustain?
You might want to check with Harbor Freight Tools, and if within is not a retail store local to you, you can go to harborfreight.com . Harbor Freight has tons of tool such as lathes that are NEW not 2nd mitt at...

I am redo my son's room. His ceiling is lathe and plaster.?
The plaster is covered with wallpaper, paint, more layers of wallpaper and even so more paint. My husband and I have scraped most of it off, but one side of the room is not going as very well as the other. It looks as if they used a...

I am working as a lathe hand, i have ITI.and requirements to budge country similar to UK or USA.what should i do ?
where i would get work visa and how? There are over 2million British associates unemployed, I'm sure some of them must be lathe operators. Probably best if you find a livelihood in your own country. Search for...

I bought a wood lathe. I'm using dried wood but my finished product most other splits. what to do?
Not all wood is suitable for turning on a lathe. Select a harder wood. Be sure you are not working against the pellet. Your tools need to be absolutely sharp! Take stale only a this layer at a time. Boy, hold...

I call for to spawn small project on lathe cnc to be completed surrounded by 21 hrs what r the thinking??
A sprinkler team leader? A stepped axle & drive hub? A trim for a control valve? How about a spinning top? You can make a spring loaded center punch.

I can't remove the chuck from my wood lathe!?
I recently bought an Enco 1993 1/2 horsepower wood lathe used off of craigslist. It works great and sounds polite. Only issue is I can't remove the chuck from the spindle. I have taken it completely apart and back together. There is no bit of a mechanism to lock the spindle...

More Lathesquestions please visit : MachineryFAQ.com

About the Author

MachineryFAQ.com

Wood Lathe article

Sears Craftsman

I got a Sears Craftsman snow thrower from an uncle ... it has sat for over a year. I am trying to start it ...?

I spray starting fluid in it and it will run for a while but wont keep running. What things could be wrong with it ??

Sounds like the carburetor needs cleaning. It should be removed, taken apart, soaked in a good solvent and put together with a rebuild kit. Watch the way the throttle linkage and springs are attached before you take it apart.

Lathes Questions & Answers

I carry confused which axis is which when it comes to a cnc lathe can someone notify me which direction x and z r?
X is perpendicular to the spindle axis (changes diameter) Z is parallel to the spindle axis

I enjoy plaster lathe walls within my victorian house. 1 wall is crumbling away!?
If i were to take it adjectives off so the wood is remaining could i bond plaster board to it then enjoy it skimmed? Also is it ok to have the ceiling skimmed also ( plaster lathe) the ceiling seems solid or would you recomend plaster...

I get the milieu within device, but stipulation to swot up how to programs cnc lathe &milling .?
Dear; Please check for G- code and M- codes for these machine languages. you can also look into for them on the net. Alternatively you can get them contained by any CAM book. Basically programming these machines is not much difficult task...

I Have A Home Machine Shop that includes metal, a lathe, a mill, and a sander?
I WANT TO SELL THINGS AT THE SWAP MEET. WHAT CAN I POSSIBLY MAKE WITH THE METAL THAT PEOPLE WILL BUY. DO YOU GUYS HAVE ANY IDEAS?? Tons of items. Sculptures... for waterscapes, lawns and gardens. Knives, decorative trim for houses( doors , windows...

I hold a lathe and adjectives the tools and skills i have need of, would it be flowing to create a pool cue out of aluminum?
i was just wondering if it would be possible to receive a pool cue out of aluminum, i already have a regular cue but i want to make my own but what i entail...

I hold an elder house next to plaster and lathe walls the outlets don't stay within really in good health?
can anyone tell me how to secure them minus tearing the walls down and replacing the boxes and sheet rock I would agree with the spray foam solution. The filler tube can be squeezed contained by a very small crack...

I inevitability some flowing lathe projects 10 points?
So i have a smithy 3 in 1 and am looking for some commencing projects to get some lathe time in, I would resembling to ue the stuff but dont have to. Im begging gunsmithing so if I could use the stuff at hand it would be great make a C-clamp or...

I involve to know how to install a clean belt on a model 200 lathe made by logan? It is a flat belt .?
Contact the manufacturer and ask them for the scematics. The scematics will show you how to install the new belt. http://www.loganact.com I hope this help!!

I necessitate tips for using a wood lathe?
My wife's grandmother cleaned out the garage. She gave me several antique carpentry tools. Some will be polished and hung on the wall. Others, close to this Craftsmen lathe, I want to play with. I have no clue how to even commence with this thing. Unfortunately, Grandpa passed on masses years ago,...

I only acquire a 1954 Shopsmith lathe. I am untried to turning, but, want to buy aspect turning tools.?
Assuming that I will eventually buy a better lathe. I don't want to invest in sub par turning tools, only to be dissapointed. Sorby, Crown... What are your thoughts? I meditate most any of the turning tools you can buy from...

I only just recieved a Franklin Foundry 37" wood lathe beside no instruction booklet.?
Does anybody have a website for assistance with putting this point together?? http://search.yahoo.com/search?ei=utf-8&… I just found this general intermingle in Yahoo Search in a single keystroke. Certainly within should at last be some contact info in these miscellaneous links. Steven Wolf Source(s): 45 plus years...

I own a meat Lathe contraption --6'ft bed length of NANDA trademark.what can be a scuff public sale price.??
it has a 4-jaw chuck and single phase elect. motor 3-H.P. It is app.30 year old piece of equipment with bush bearings.can someone suggest it's approximate wt. and rough public sale price taking current price of cast iron[scrape].location is in Gwalior...

I own a Rockwell three foot wood lathe and 6 chisels that I want to supply but I'm not sure what its worth?
It is belt driven 4 speed in good condition and near a factory stand. I inherited it so I really have no notion Keep checking Ebay. One will show up eventually. Search the completed listing to get...

I own a wall which have diluted lathe and plaster. Can I of late remove the plaster and screw on an MDF board?
I am stripping a bathroom wall and found lathe and plaster was falling and crumbling away....Can I just remove the plaster and screw on an MDF board on to the wood or will I necessitate to plaster...

I perchase a hartford metal lathe who do i contact to find out in the region of this device . thankfulness john?
Why did you purchase it, if you don't know what it is? You could probably call any metal shop and ask for more info there give or take a few that machine. Or look up metal companies and...

I poke about for company it is product lathes inscribe index and traub surrounded by germany?
I had some difficulties to understand your interview, but I think I found the company. Source(s): http://www.index-werke.de/en/traub/home/…

I purely get a craftsman 1/2 h.p wood lathe dont know much around it?
i got the tools with it but they come across to be dull i tried to use it but the piece of wood looked shredded up could it be the toools or is it just becouse its my first time using one and can the tools...

I replaced my behind the times 5hp 3ph motor contained by my lathe near a contemporary 5hp 1ph motor. How to lead for forward and reverse rota?
I cannot find a drum switch rated for a 5hp 1ph, any other ways to do this? "> NO,you cannot replace 3 phases motor with single phase motor,because 1. motor voltage is different,never...

I requirement a wood lathe for birdhouse and dollhouse construction.?
The sears craftsman mini-lathe I am looking at will turn up to 12" stock. Have any of you used this? Did it do what you needed? No, I haven t, but it should be fine.. Your not doing commercial work or heavy duty stuff, I ve other have liked Craftsman...

I want a facade plate for my lathe.?
I have a old lathe that I want to product bowls and plates with. My questions is how do I attach the wood to the lathe. It come with this knob looking thing that digs into the wood and the other ruin holds it in place. To turn bowls I need an...

I want to clear a cylindrical metal keychain on a lathe, design?
I'm in a design technology course and our challenge is to create a cylindrical metal keychain on a C&C lathe.. deeply I need ideas of cylindrical objects that would be cool on a keychain! I'm thinking of conceivably a bullet, any other ideas? 1) Lighthouse** 2) Kaleidescope or...

I want to know roughly the lathe contrivance workings.?
The rough and ready mechanism is a rotating workpiece and a tool (for cutting). This tool can be used to reduce the outside dia., create a hole and enlarge a hole. The tool is made to move surrounded by the X, Y directions to achieve the result. lathe (lath) , mechanism...

I want to plasterboard a wall near dot and mop. I'm concerned as wall is spongy (lathe) and contained by poor state?
At this stage I cant find studs, a whole section of total is very spongy, if I push it with my paw it goes in almost 1cm at its worst, I can see lathe where all plaster have...

I want to swot up to cut thread on a lathe?
hello, I have a mini lathe and want to learn to cut threads. I enjoy looked on youtube and also founds alot of info on the web. But I would like to know if anyone know of other places I can find VIDEOS of cutting threads. All the ins...

I want to take home a cup on my lathe, but I don't know what piece I should use...?
to hold my block to the lathe securely on only one side..instead of a spur drive center, what is the entitle of the piece that is large and closes around the block? your comfort is greatly appreciated...buuutttt, it would be really...

More Lathesquestions please visit : MachineryFAQ.com

About the Author

MachineryFAQ.com

Sears Craftsman

There are many advanced woodworking schools out there, but finding the truly best of the best should be your goal. This article is going to outline the three best advanced woodworking schools out there and leave it up to you, the reader, to decide which, if any, is best for you.

Lohr School of Woodworking

The first of our advanced woodworking schools to look at is the Lohr School of Woodworking. J.D. Lohrs Practical Woodworking is a forty eight hour course that teaches you all the skills necessary to become a truly master woodworker. Students of all levels can benefit from this class, but it is truly meant to be enjoyed by advanced woodworkers. As with any woodworking instruction, students will be working with power tools so caution is first and foremost.

The school boasts four table saws, three jointers, three drill presses, two thickness planars, two wood lathers, full dust collection, spindle shapers, bandsaws, jig saws, scroll saws, as well as dozens of routers and jig accessories. In addition to these the school is fully stocked with all the assorted high quality tools you need to really bring your woodworking to another level. They offer a 48 hour boot camp so that you can go and get your skills up without having to wait years and months. This school is highly recommended.

Advanced Woodworking Schools

Next on our list of advanced woodworking schools is the Homestead Woodworking School. This school, located in Newmarket, New Hampshire, offers classes for all skill levels. All of the instructors are professional woodworkers in addition to be teachers and each offers there own areas of specialization to help you get the most out of your woodworking talent.

They offer many different courses throughout the year so check their website to find a class that is good for you. In addition they offer a comprehensive ten week course that takes you from the history of woodworking to its practical applications.

Connecticut School of Woodworking

The final school on our list of advanced woodworking schools is the Connecticut Valley School of Woodworking. This school offers classes starting with the fundamentals working up to professional furniture finishing techniques. They boast an extensive list of classes and instructors, so check their website to find what most applies to your skill level and interest.

Any of these three schools would be a good choice, but give them each a call to find the right one for you.

Woodworking equipment is very useful and incredibly popular around the world. Asia woodworking equipment is particularly notorious, for its high quality make and affordable price. If you are interested in purchasing Asia woodworking equipment yourself, there are a few companies in particular that are going to be worth checking out.

House of Tools

House of Tools is one of the top woodworking tools companies in the world, and one that offers a vast and comprehensive selection of Asia woodworking equipment. When it comes to woodworking machinery in general, no one has a better selection than they do, and they have everything the consumer needs for bench top, floor models, home use, contractor, shops or heavy industrial and production machinery.

For production machinery they offer band saws, clamping equipment, dust collection, edgebanders, horizontal beam saws, jointers and planers, point to point machines, sanding machines, shapers, sliding table saws, specialty machines, veneer equipment, wood lathes, pneumatic cut-off saws, wood lathes and more.

For Asia woodworking equipment they also offer a variety of floor model machines including band saws, drill presses, jointers and access, spindle sanders, table saws and access, wood lathes and access, and planers, molders and access.

MLS Machinery

Another company worth checking out for Asia woodworking equipment of all sorts is the MLS Machinery Company. They offer everything from carving machines, chair making equipment, compressors, pumps, flooring equipment, dowel equipment, finger jointers, glue spreaders, and lathes to material handling equipment, new woodworking machinery, packaging equipment, rip saws, tenoners, veneer equipment, wood waste equipment and more.

They specialize in sourcing and listing both new and used woodworking machinery, and they are always dedicated to providing all of their customers the best service possible. They have over 350 years of combined experience, so you know that you can trust in them and rely on them to offer you the tools and information that you need.

Their website features an online catalog of the various different woodworking pieces they offer including all recent arrivals that you can quickly click to.

If you are not sure of the particular pieces of woodworking equipment to look for, then you should be able to find qualified and trained employees at the company you are shopping at and speak to them about this.

They will talk to you, help to figure out exactly what it is that you need and then make sure that you have an understanding of the selection that is available to you.